Voron v.2.4r2 Rev.C- LDO Kit - 350mm - Black Frame - Batch Delivery 15.12.2024

このキットにはRaspberry Piと3Dプリントパーツが付属していません。組み立て・動作させるためには別途調達が必要です。

***重要事項***

• 3Dプリンターを扱った経験のない場合は、購入を再検討してください。

• この3Dプリンターを組み立てるためには十分な時間、ツールと知識が必要です。少しの電気工学の知識と高度な3Dプリンターの知識を推奨します。このキットにはすでに圧着されたケーブルハーネスが付属してはいますが、圧着工具を所有していること、3Dプリントされたパーツを調達、又はプリントしていることが前提になります。経験豊富なVoronビルダーでも、1つのビルドを完成させるのに15~20時間かかります。初めてVoronを組み立てる人は、すべてを組み立てて印刷できるようになるまで40~50時間かかることも珍しくありません。

• キットの購入と組み立てを決意するまえに、Voron Desiginが公開している"Assembly Manual"を読み込むことをおすすめします。

• Voron購入ガイドとFAQを最後までお読み下さい。また、電話による技術/組み立てサポートは行っていませんのでご注意ください。質問とサポートはメールとDiscordでのみ行っています。

Please note this is a printer parts kit only, 3D printed parts, Raspberry Pi are not included and need to be procured separately.

**** Important remarks before you buy this Kit

• If you don’t have any experience with 3d printers, do not buy this kit.

• You need time and tools to build this 3d printer. DC electronics and advanced 3D printer knowledge is recommended. The LDO kit comes with already crimped cables, but It is assumed you know how to crimp cables, own a crimper, and have sourced/printed the required 3D Parts to complete the build. Experienced Voron builders take 15-20 hours to complete a build. It's not uncommon for first-time builders to be taking 40-50 hours before everything is complete and ready to print.

• It is recommended you read the assembly manual in completion before committing to purchase and build a kit.

• Read our Voron Buying Guide & F.A.Q. in completion & note that we do not provide technical / building support via phone - We only support questions/support via email & discord.

Features & Extras

• V2.4r2 Compatibility - Our kit is designed to be compatible with V2.4 Rev2.

• Stainless Steel Linear Rails - 12H size rails for X axis included. No more worrying about rusty rails. Remember to properly lubricate your linear rails!

• Revo Hotend LDO Voron edition included, with a 0.4 and a 0.6 nozzle

• 4.3’ Touch Screen for KlipperScreen

• Customized Silicone Bed Heater, better match LDO design.

• Toolhead PCB - Our kit includes a modified 2 parts SB LDO modified Hartk toolhead PCB. In addition, we designed a toolhead breakout PCB to make wiring at the controller end simple and straightforward.

• Externally Mounted Thermistor for more accurate Chamber Temperature sensing.

• other minor upgrades for a better experience

• Nickel-plated carbon steel screws for a nice look and high corrosion and tensile resistance

• LDO build plate, 10mm thick, compared to the 6mm in the lower Voron specifications.

• Brass Heatset Insert Tool - We've included a custom machined brass tip for your soldering iron, use it to install heatset inserts with ease! Check here for more information.

• Input Shaper Tool- We threw in a toolkit that includes all the necessary parts to help you perform input shaper calibration, hassle-free.

• Pre-cut & Pre-wired - Our kit includes all necessary wiring: cut to the right length and pre-crimped or soldered to their respective parts. See our detailed wiring guide here.

• LED Lighting - Bring lighting to your Voron with included LED strips and all necessary wiring!

• Nevermore Filter - We include parts for an optional internal circulation filter: the Nevermore Micro V5 by 0ndsk4 (carbon pellets not included due to shipping restrictions).

• Klicky Mod - Instead of the included Omron inductive probe, We also provide the parts to build your machine using the optional Klicky mod by jlas1.

• Small Tools - We include a small set of hex wrenches for all the fasteners used in the build (Preparing your own set of good quality hex wrenches is still recommended). Also included is a small flat head screwdriver that is useful in a surprising number of situations.

• 2mm Drill Bit - Metric drill bits may not be very common in some parts of the world, so we included one. Use it to ream the filament path in your printed extruder parts.

Tips

• Take advantage of the Voron on Discord: https://discord.gg/voron. The community is very active on Discord and the users are very helpful on the #voron_2_questions channel.

• Since printed parts are NOT included with the kit, it is recommended get them from through the Voron Print It Forward program if you are unable to print them for yourself. They will provide the essential parts for a very reasonable cost to get your printer working.

• Download Fusion 360 and get a free license to view the 3D model of the printer. The 3D model is a very useful reference when you encounter anything in the manual that is ambiguous or unclear.

• Check out Nero 3D and Steve Build's Youtube channels, both are part of the Voron team and have tons of useful videos for building Vorons.

• Print a Voron Cube, then print a Steppy!

• Get a serial number once you finish building your Voron.

Guides

• Printed Parts Guide (LDO supplement) - Are you planning on printing parts before the kit arrives? Read our supplementary print guide to see which parts to print/replace/omit.

• Wiring Guide - We created this supplementary wiring guide to go along with the included cable kit. We recommend reading the guide ahead of time: Some cable routing is required while you assemble the mechanical components.

• Tuning Guide - We highly recommend reading over this very detailed tuning guide by Ellis to help print out the best possible-looking parts.

• Cable Chain Guide - See our short guide here for tips on our included cable chains (also known as drag chains).

• UK2.5 Terminals - See this short guide for tips on using the UK2.5 terminals included in our kits.

Acknowledgements

Our team at LDO would like to give our heartfelt thanks to the Voron team, beta testers, and members of the community for helping us constantly improve our kits:

• Beta Kit Testers (V2.4-300): Steve, Doc, wile.e, badnoob.

• Beta Kit Testers (V2.4-350): hartk, Blamm.

Build/Review Videos

• Nero 3D Build Stream